The ROP Shop | Pressure Washer Pump For Ryobi 308653093, 308653052, 308653045, 308653025 Water

The ROP Shop replacement Pressure Washer Pump for Ryobi 308653093, 308653052, 308653045, 308653025 Water Specs - Maximum Pump Pressure: 3100 PSI. Maximum Pump Flow: 2.5 GPM. Maximum Pump Speed: 3400 RPM. Pump Shaft Diameter: 7/8" Shaft. Pump 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Pump Water Temperature: 140° F. Pump Inlet Connection Type: Standard Garden Hose. Pump Outlet Tube Connection: 22mm Male. QC Plug Female Pipe Thread End: M22 (14mm). QC Plug End: 3/8". QC Coupler Male Pipe Thread End: M22 (14mm). QC Female Coupler End: 3/8". Refer to images 2 and 3 for more information Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube, (1) Quick-Connect Plug & (1) Quick-Connect Coupler; comes as shown in the first image This pump mounts vertical and is a front facing (water inlets/outlets come out of the front of the engine). Pump needs at least 6HP to handle PSI. Pump head can be flipped. Thermal relief valve comes pre-intalled. This is a sealed unit, no oil maintenance required. Brass outlet tube MUST be removed if quick-connect is being used This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress (spacers & longer bolts are NOT included)